The new AT2010 is designed to bring the
studio-quality articulation and intelligibility of Audio-Technica’s
renowned 20 Series to the stage, for crystal-clear vocal performances.
Featuring the same 16 mm low-mass diaphragm found in the critically
acclaimed AT2020 side-address studio condenser, the AT2010 excels
wherever articulate vocals are needed: in houses of worship, for solo
performances, jazz vocalists, singer/songwriters, and more.
- Extended frequency response and superior transient response for smooth, natural sonic characteristics
- High SPL-handling and wide dynamic range provide unmatched versatility
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity
- Corrosion-resistant contacts from gold-plated XLRM-type connector
- Rugged, all-metal and construction for years of trouble-free service
- Quiet-Flex™ stand clamp provides silent, flexible microphone positioning
|
SPECIFICATIONS |
| |
| ELEMENT |
Fixed-charge back plate permanently polarized condenser |
|
| POLAR PATTERN |
Cardioid |
|
| FREQUENCY RESPONSE |
40-20,000 Hz |
|
| OPEN CIRCUIT SENSITIVITY |
–48 dB (3.9 mV) re 1V at 1 Pa |
|
| IMPEDANCE |
100 ohms |
|
| MAXIMUM INPUT SOUND LEVEL |
136 dB SPL, 1 kHz at 1% T.H.D. |
|
| DYNAMIC RANGE (typical) |
113 dB, 1 kHz at Max SPL |
|
| SIGNAL-TO-NOISE RATIO |
71 dB, 1 kHz at 1 Pa |
|
| PHANTOM POWER REQUIREMENTS |
48V DC, 2 mA typical |
|
| WEIGHT |
233 g (8.2 oz) |
|
| DIMENSIONS |
179.1 mm (7.05") long,
50.8 mm (2.00") maximum body diameter |
|
| OUTPUT CONNECTOR |
Integral 3-pin XLRM-type |
|
| ACCESSORIES FURNISHED |
AT8470 Quiet-Flex stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch |
|
| |
|
SPECIFICATIONS GRAPHS |
| |
| Click on the chart to view the larger image |
 |
POLAR PATTERN |
 |
FREQUENCY RESPONSE |
|
| |
|
CONDITIONS |
Specifications and product details are subject to change without notice.
Definitions/explanations for technical terms will be found in a large Glossary on this site. Links have not been included within the text on most pages, to keep them as readable as possible; but a Glossary button appears in the Navigation Bar at the top of each page.
Microphone Conditions (Additional comments)
Open Circuit Sensitivity At 1 kHz, with 1 Pa (Pascal) = 94dB sound pressure level (SPL), measured at diaphragm. Stated in dB re 1 volt, and in millivolts.
Noise, typical A-weighted, using Audio Precision System One measurement system.
Weight Stated for the microphone only, without accessories, and without attached cable/power module, if applicable.
Frequency Response (Graph) Shows mic output versus frequency with a constant sound input level from a source 0.5 meters from the diaphragm. Each vertical division in the graph is 10dB. A dashed line, if present, shows the effect of a low-roll-off (hi-pass) function.
Polar Pattern (Graph) Shows mic output versus angular direction of the sound source, with a constant sound input level at 1 kHz, at a constant distance from the diaphragm. Zero degrees (0°) is the "front" of the mic. Each circular division in the graph is 5 dB, beginning from the 0° point and counting inward.
Additional Information Profile pages for some products provide links to additional information, such as further specifications, operating instructions, product reviews, etc. These may be in various forms, such as text, graphics and pdf files.
Related Models Some profile pages provide links to other models of a most-similar or closely related type or function that may also be of interest.
Headphone/Headset Conditions (Additional comments)
Headphone Sensitivity Input of 1 milliwatt at 1 kHz into rated impedance; output in dB SPL, using a Brüel & Kjaer 4153 coupler.
Maximum Input Power At 1 kHz into rated impedance.
Boom Mic Sensitivity Open circuit, at 1 kHz, with 1 Pa (Pascal) = 94dB sound pressure level (SPL), measured at diaphragm. Stated in dB re 1 volt, and in millivolts.
Additional Information Profile pages for some products provide links to additional information, such as further specifications, operating instructions, product reviews, etc. These may be in various forms, such as text, graphics and pdf files.
Related Models Some profile pages provide links to other models of a most-similar or closely related type or function that may also be of interest. |
|
